Choose only the characters you need to make your message from 0-9, A-Z, period, forward slash (/), dash, and blank spaces. To create your message, place characters in the holder and then tighten with the included hex key. The spring pin locks them in place for proper alignment. For holder to work properly, you must fill unused spaces with blanks. These stamps make marks on surfaces with a Rockwell hardness up to C28, including leather, wood, and most metals.
Characters (sold separately) come individually or as sets. If ordering replacement or additional characters, make sure the character height and notch-to-end length match that of characters you already have.
Holders
| For Character Ht. |
Holder Lg. |
Choose a Max. No. of Characters per Line |
Each | |
| 1/16“ | 5 1/4“ | 16 | 1570T31 | $176.85 |
| 1/8“ | 5 1/4“ |
8, 12, 15
|
1570T12 | 183.64 |
| 3/16“ | 5 1/4“ |
10, 15
|
1570T15 | 194.15 |
| 1/4“ | 5 1/4“ |
8, 12
|
1570T17 | 188.71 |
| 3/8“ | 5 1/4“ | 6 | 1570T3 | 216.05 |
| 1/2“ | 5 1/4“ | 6 | 1570T4 | 308.27 |
Characters
Individual Characters
|
Shank
|
|||||||
|---|---|---|---|---|---|---|---|
| Character Ht. |
Lg. | Wd. | Thick. | Notch-to-End Lg. |
Stamp Material |
Each | |
| 1/16“ | 1″ | 3/32“ | 1/4“ | 1/4“ | Steel | 1570T16 | $6.98 |
| 1/8“ | 1″ | 1/8“ | 1/4“ | 1/4“ | Steel | 1570T18 | 7.77 |
| 3/16“ | 1″ | 3/16“ | 1/4“ | 1/4“ | Steel | 1570T19 | 8.35 |
| 1/4“ | 1″ | 1/4“ | 3/8“ | 1/4“ | Steel | 1570T5 | 9.58 |
| 3/8“ | 1″ | 3/8“ | 1/2“ | 1/4“ | Steel | 1570T6 | 16.86 |
| 1/2“ | 1″ | 1/2“ | 5/8“ | 1/4“ | Steel | 1570T7 | 28.55 |
Blanks
|
Shank
|
|||||||
|---|---|---|---|---|---|---|---|
| Character Ht. |
Lg. | Wd. | Thick. | Notch-to-End Lg. |
Stamp Material |
Each | |
| 1/16“ | 1″ | 3/32“ | 1/4“ | 1/4“ | Steel | 1570T22 | $2.51 |
| 1/8“ | 1″ | 1/8“ | 1/4“ | 1/4“ | Steel | 1570T24 | 2.56 |
| 3/16“ | 1″ | 3/16“ | 1/4“ | 1/4“ | Steel | 1570T25 | 2.64 |
| 1/4“ | 1″ | 1/4“ | 3/8“ | 1/4“ | Steel | 1570T8 | 3.65 |
| 3/8“ | 1″ | 3/8“ | 1/2“ | 1/4“ | Steel | 1570T9 | 7.78 |
| 1/2“ | 1″ | 1/2“ | 5/8“ | 1/4“ | Steel | 1570T11 | 11.18 |
Number Sets
|
Shank
|
||||||||
|---|---|---|---|---|---|---|---|---|
| Character Ht. |
Lg. | Wd. | Thick. | Notch-to-End Lg. |
Stamp Material |
Includes | Each | |
| 1/16“ | 1″ | 3/32“ | 1/4“ | 1/4“ | Steel | One each of 0-9 | 1570T712 | $69.71 |
| 1/8“ | 1″ | 1/8“ | 1/4“ | 1/4“ | Steel | One each of 0-9 | 1570T713 | 77.67 |
| 3/16“ | 1″ | 3/16“ | 1/4“ | 1/4“ | Steel | One each of 0-9 | 1570T714 | 83.65 |
| 1/4“ | 1″ | 1/4“ | 3/8“ | 1/4“ | Steel | One each of 0-9 | 1570T715 | 96.24 |
| 3/8“ | 1″ | 3/8“ | 1/2“ | 1/4“ | Steel | One each of 0-9 | 1570T716 | 160.62 |
| 1/2“ | 1″ | 1/2“ | 5/8“ | 1/4“ | Steel | One each of 0-9 | 1570T717 | 285.44 |
Letter Sets
|
Shank
|
||||||||
|---|---|---|---|---|---|---|---|---|
| Character Ht. |
Lg. | Wd. | Thick. | Notch-to-End Lg. |
Stamp Material |
Includes | Each | |
| 1/16“ | 1″ | 3/32“ | 1/4“ | 1/4“ | Steel | One each of A-Z | 1570T612 | $181.22 |
| 1/8“ | 1″ | 1/8“ | 1/4“ | 1/4“ | Steel | One each of A-Z | 1570T613 | 201.91 |
| 3/16“ | 1″ | 3/16“ | 1/4“ | 1/4“ | Steel | One each of A-Z | 1570T614 | 217.44 |
| 1/4“ | 1″ | 1/4“ | 3/8“ | 1/4“ | Steel | One each of A-Z | 1570T615 | 250.25 |
| 3/8“ | 1″ | 3/8“ | 1/2“ | 1/4“ | Steel | One each of A-Z | 1570T616 | 417.64 |
| 1/2“ | 1″ | 1/2“ | 5/8“ | 1/4“ | Steel | One each of A-Z | 1570T617 | 742.09 |